Diatone Mamba F405 and F405 Mini stacks

Diatone has released Mamba stack F405 FC with F40A ESC, and mini stack version with F405 mini and F25A ESC back in the  year 2018. The FC was also called Fury F4 and Fury F4M (Betaflight target is was called Fury F4 OSD) and the stacks also were called Mamba Power Tower. These are one of the most popular stacks and have been several times updated. 

Diatone Mamba stacks don’t not have User Manuals, but instead Diatone provides detailed connection diagrams.


Diatone Mamba F405

First Diatone Mamba F405 stack was released in 2018-08

2019-05: Diatone released an updated, so called MK2 versions of the Mamba F405 stacks. The main differences between the F405  MK1 and F405 MK2: rearranged majority of the pads, added the 9V output for DJI digital FPV support, almost completely new FC.

Diatone Mamba F405 MK2 with F40 ESC connection diagram:

Diatone Mamba F405 MK2 with F50 ESC connection diagram:

There are 5 status LEDs on the Mamba F405  (MK1 and MK2) flight controller. They are the status indicators for the following:

  1. Blue -> Betaflight (or other firmware) Status LED
  2. Orange -> Betaflight (or other firmware) Status LED
  3. Green -> 9V Power Rail Active
  4. White -> 5V Power Rail Active
  5. Red -> 3.3V Power Rail Active


Available @




Mamba F405 Power Tower specifications:
Item name: F405 Betaflight Flight Controller
Input power: 12-25V (3-6S)
BEC: 5V/1.5A
MCU: STM32F405
Gyro: MPU6000
Flash: 16MB
OSD: AT7456
Mounting hole: 30.5*30.5mm
Weight: 6g

Mamba F40 Esc
Item name: Mamba F40HV ESC
Input voltage: 3-6S (12.4V~25V)
Continue current: 40A×4
Burst current: 40/50A (6S)
Mounting: 30mm / φM3
Weight: 10g



Diatone Mamba F405 mini

Older revision of the Diatone F405 Mini MK2:

Current revision of the Diatone F405 Mini MK2:

Mamba F405 Mini MK2 connection diagram:

Available @



Mamba F405 Mini Power Tower Specification:
Item name: F405 Mini FC
INPUT: 2~4S LIPO (7.4V~16.8V)
BEC: 5V 1A
MCU: STM32F405
Gyro: MPU6000
OSD: AT7456
WEIGHT: 3.5g

Item name: Mamba F25HV ESC
Input voltage: 2~4S (7.4V~16.8V)
Continue current: 25A×4
Burst current: 30A (10S)
Size: 30×30×5mm
Mounting: 20mm / φM2
Weight: 8g



Diatone Mamba F405 Mini MK3

2020-06 Diatone released MK3 version of the F405US Mini stack. This stack is available in two versions: standard FPV and DJI.

Mamba F405US Mini MK3 connection diagram:

Available @

Diatone: https://www.diatone.us/collections/mamba-stack/products/mamba-f405us-mk3-mini-4-6s-flight-controller-stack


Diatone Mamba F405 Mini MK3 DJI

Mamba F405 Mini MK3 DJI connection diagram:

Available @


Banggood: https://www.banggood.com/20+20mm-MAMBA-F405-MINI-DJI-F35-3-6S-Flight-Controller-FPV-Combo-Stack-for-RC-Drone-p-1680020.html

Leave a Reply

Your email address will not be published. Required fields are marked *