FullSpeed Toothpick PRO on steroids

Toothpicks should be getting more power – let’s give them steroids. Thats what FullSpeedRC were thinking about and announced the 4S capable Toothpick PRO quad with FSD 1106 size 4500KV motors. The same motors as in Fullspeed Leader 3/3SE. They have enormous power compared to the other toothpick quad 110X size motors. Other specs are almost the same as previous Fullpeed Toothpick – FullSpeed FSD412 Flight Controller with  FSD412 4in1 12A ESC and the same FSD TX600 25mW-600mW Video Transmitter. Toothpick PRO frame is thicker – 2.5mm instead of the 1.5mm. Total weight increased from 41.5 to 65 grams. Toothpick PRO comes with 2535 4-bladed propellers.

 

Available @ 

FullspeedRC: http://www.fullspeedrc.com/fullspeed-toothpick-pro-fpv-racing-drone-2-4s-1106-25quot-prop-25-600mw-vtx_p0206.html

Specification:
Name: FullSpeed Toothpick PRO
Weight:65g (without battery)
Thickness of bottom plate: 2.5mm
Flight controller: FSD412(F411 2-4S FC) 5V 2A BEC  built-in OSD
ESC: FSD4121-4S ESC)  BLHELI_S 4in1 ESC Dshot600
Motor: 1106 4500KV 
Propeller: 2535 4-blade propeller
Camera: Caddx Micro F2 camera with angle adjustable(0°- 45°)
VTX: FSD TX600 Pit/25/100/200/400/600 switchable VTX(support IRC Tramp)

FullSpeed FSD412 (F411 FC) Flight controller
Size: 20mm x 20mm x 5mm
Mounting hole: 16mm x 16mm
MCU: STM32 F411
Gyroscope: MPU6000
BEC: 5V/2A
Input Voltage: 2-4S Lipo or 2- 4S HV Lipo
Built-in Betaflight OSD

FullSpeed FSD412 1-4S ESCBLHELI_S 4in1 ESC 
Size: 20mm x 25mm x 5mm
Mounting hole: 16mm x 16mm
Firmware: BLHELI_S 
Input Voltage: 1-4S Lipo or 1- 4S HV Lipo
Continuous current: 12A
BEC Ouput: NO

FullSpeed FSD TX600 25mW-600mW VTX FPV Transmitter
Output power: PIT/25mW/100mW/200mW/400mW/600mW switchable
Control mode: BF OSD control (support IRC Tramp)/button
Video system: NTSC/PAL
Antenna: IPEX
BAT: 5V Recommended
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ   
Size: 26*26mm(L*W),Hole:20*20mm
Weight: 2.3g

Leave a Reply

Your email address will not be published. Required fields are marked *

*