SPCMaker K1 & K2 quadcopters

SPCMaker has released two new quadcopters K1 and K2. They both are equiped with Runcam Split Mini 2 for 1080p/60fps video recording. K1 is 95mm base size an K2 is 115mm base size. Both fit 2inch EMAX Avan Blur 2 propellers. Both quadcopters have  Omnibus F4 Flight Controller with MPU6000 SPI gyro, 20A Mini 4 in 1 BLheli_S ESC.  (2-4S LiPo), 1105 6000KV Brushless Motor and 5.8G 40CH 25mW/100mW VTX.

Quadcopters are offered in 5 versions: without receiver, with DSM2/X, Frsky, Flysky or Futaba receivers.

K1 and K2 quadcopters weights only 91grams (without receiver). Pretty small weight for a quadcopter with Full HD camera on board.



K1 available @ https://www.banggood.com/SPCMaker-SPC-K1-95mm-Omnibus-F4-20A-BL_S-FPV-Racing-Drone-PNP-BNF-w-RunCam-Split-Mini-2-Camera-p-1357411.html

K2 available @ https://www.banggood.com/SPC-Maker-K2-110mm-FPV-Racing-RC-Drone-PNP-BNF-Omnibus-F4-20A-BLHeli_S-ESC-RunCam-Split-Mini-2-p-1357342.html

Specifications of K1 & K2:

Omnibus F4 Flight Controller Item Name: Omnibus F4 Flight Controller Integrated with OSD PDB BEC
Firmware: OmnibusF4SD
Main Chip: STM32F405      
MPU6000 6 aixs SPI Gyro & Acc
BEC: 5.1V@1.2A
Size: 27x27mm
Mounting Hole: 20x20mm
Weight: 3.5g
– DShot1200 Support
– SBUS/PPM and Speketrum DSM Ports 5.5V BEC Support
Brushless Motor 1105 6000KV Brushless Motor 
20A BL_S 4in1 ESC Item Name:20A BL_S 4in1 ESC
Con. Current: 20A
Input Voltage: 2-4S Lipo Support
Firmware: BLheli_S
Dimension: 29x31mm
Mounting Hole: 20x20mm
Weight: 4.9g
– Support DShot150, DShot300 and DShot600 
Don’t Recommend PWM 
Emax Avan Blur 2 Inch Propeller  Item Name: Emax Avan Blur 2 Inch 3-Blade Propeller 

Diameter: 2 inch 
Pitch: 1.9 inch 
Weight: 1.1g
FPV Transmitter Item Name: 5.8G 40CH 25mW 100mW VTX
Input Voltage: 5-6V 
Operation Current (5.5V) : 310mA@25mW
Frequency: 5.8G 40CH 5645-5945MHz
FPV Camera Item Name: Runcam Split Mini 2 Camera

Field of View(FOV): FPV FOV 130° / Recording FOV 165°
Video Resolution: 1080@60fps / 1080@30fps / 720@60fps
Video File Format: MOV
Image Resolution: 2 MP
TV Mode: NTSC (720*480) / PAL (720*576) Switchable
Interface : JST 1.0mm / UART
Max Micro SD Card Supported: 64G(need Class 6 or above, recommend Class 10 / UHS-I / UHS-II / UHS-III)
Hole Distance of Installation: 20*20mm
Dimensions: PCB 29*29mm / Lens Module 19*19mm
Power Input: DC 5-20V
Working Current: 650mA @5V / 270mA @12V
Weight: 12.5g


Leave a Reply

Your email address will not be published. Required fields are marked *