Caddx ANT Nano FPV camera

Caddx has released the teaser with their new nano sized camera called ANT. This new nano sized camera weights only 2 grams. It is a bit heavier than RunCam Nano  3 camera (1.1 gram), but Caddx ANT has screw holes for easier mounting. Camera also has wide range of the input voltage: from 3.7V up to 4S battery. Caddx ANT has 1.8mm lens with a 165° FOV.

I wish Caddx could make a version without the connectors, just the soldered wires directly to the camera board.

Specifications
Model: Caddx Ant
Image Sensor: 1/3″ CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC or PAL
OSD menu: Support
Image format: 16:9 or 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio: >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm
Min. Illumination: 0.001Lux@F1.2
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm(with bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Work Temperature: -20℃~+60℃
Work Humidity: 20%~80%
Weight: 2g (N.W.)

 

Packing List
Camera x1
3pin FPV silicone cable x1
Warranty card x1
Expend bracket x1
Screws x 4

 

Available @ 

Caddxhttps://caddxfpv.com/products/caddx-ant-1200tvl-global-wdr-with-osd-2g-ultra-light-nano-fpv-camera

 

Source: Facebook

Comments
  1. GapSnapper Fpv
  2. Marc Frank

Leave a Reply to Marc Frank Cancel reply

Your email address will not be published.

*