RunCam Racer Nano 2 FPV camera

RunCam Racer Nano camera now has never version. RunCam Racer Nano 2has the same 2.1mm (M8) FOV 145° / 1.8mm (M8) FOV 160° lens as in previous version. RunCam decided to to install the 4pin 1.25mm JST connector instead of the presoldered wires that were in first RunCam Racer Nano version. Good news that Racer Nano 2 now supports 5-36V power input voltage. Camera has OSD, and settings can be controlled by joystic keypad or by hand gesture control.

RunCam Racer Nano 2 camera chipset and the lens are as same as the famous RunCam Racer 2, so it also has super WDR with racing-level 6ms low latency. RunCam promises that “Moiré interference is greatly reduced and the color is also better”. 


Sample video of RunCam Racer Nano 2

Available @



RunCam Racer Nano 2 User Manual:

Model: RunCam Racer Nano 2
Image Sensor: Super WDR CMOS Sensor
Horizontal Resolution: 1000TVL
Lens: 2.1mm (M8) FOV 145° / 1.8mm (M8) FOV 160°
Screen Format: 4:3 / 16:9 Switchable
Signal System: NTSC / PAL Switchable
Mirror System Available
Integrated OSD: Yes
One touch Scene Setting Personal / Lightrax / Darkness
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Min. illumination 0.01Lux@1.2F
WDR: Super WDR
Day/Night Color
Menu Control: Gesture Control / Joystick Control
Power: DC 5-36V
Working Current 100mA@5V / 40mA@12V
Housing Material ABS
Net Weight 3.6g
Dimensions L14mm*W14mm*H16mm



Leave a Reply

Your email address will not be published. Required fields are marked *